Final version of the Dai Jin painting

Final version of painting, a photo by Paul&Siu on Flickr.

Previously we performed two stages of a rendition of a Dai Jin painting.   We did the initial ink work, and added a first glazing of color (see previous blog).  The picture has taken shape.   The final stage would involve some "tweaking" --to clarify certain elements and to reinforce depth effects, we strengthen certain edges, darkening the lines, adding dots etc.  We added more texturing to the rocks, more blues to the shadows...
Then after the latest paints have dried, we wet the whole paper, blotting away excess water, to produce a uniformly damp substrate.   Then we do a "wet-wash", which provides a very soft and even coloring. This brings out the mist/fog by coloring its surroundings --otherwise the mist's white (the blank space) will not show.  We do the water.  Note the selective glazing of the water to bring out the sense of flow. We also darken the foreground some, and voilà!

Dai Jin painting: stage 2.

Dai Jin painting: stage 2., a photo by Paul&Siu on Flickr.

Stage 2 will comprise of selectively strengthening the edges between layers of scenery,  by darkening of lines, or new dark lines, and/or dots. Then when dry, add color.  When glazing on the color,  use a brush stroke consistent with the texture or lay of the object.  Thus, if the rock runs at some angle,  glaze in the same direction. 
Typical colors: For rocks, mix brown and blue.  The bright side of the rock,  use brownish tint.  For the shadow,  use bluish tint.   Tree leaves, use yellow mixed with black. 
Make sure the colors are well mixed and dispersed. They should be a dilute mix.  Intensity is built up by repeated layering of colors.   If you color too intensely in one go, it will look too stiff. 
As for the interface with the fog or clouds,  use a dry brush to provide an irregular edge.   For the edges of the waterfall, also use a dry brush, to ensure no bleeding into the waterfall,  which must be kept white! 
See my version of coloring is as a guide. 
Keep in mind there is still stage 3, which is a wet wash process,  to come.

Doing the Dai Jin painting

Doing the Dai Jin painting, a photo by Paul&Siu on Flickr.

A few blogs ago, we showed a section of a painting by Dai Jin.  Here we discuss how to proceed with creating a version of it.   To start,  it's best to begin with ink of light to medium intensity.   That way,  we can make modifications or augmentation later with darker ink. Start at the most prominent feature in the middle section of the painting.   It is the large boulder. The rest will build up from there, and will be scaled and positioned relative to it.  My rendition, the first stage is attached --as a guide to show the ink tones and the degree of development appropriate for the first stage. Again,  certain parts will be darkened, and details added in later stages.

Thanksgiving Greetings

Thanksgiving Greetings, a photo by Paul&Siu on Flickr.

We have been having a really fine October here at the Lower Mainland of BC.  Dry!  Bright foliage!   With all different colors, the trees are especially beautiful, each showing its unique shape and stance.   Wishing all a happy fall season.

About Rocks

How to render rocks? Lets consider a rectangular block, on the lower left, with natural light coming coming from the top. Then the other 2 visible sides will be in the shade or shadow.  These will be depicted with texture strokes.  Progressing towards the right , we just make the block more and more irregular.  Think in terms of edges and shades.  The top edge is obtained with a bold line.  The lower parts are mostly texture and shadows.  The bottom edge of the rock is best done together with the texturing.   Do the top edge/line with a sense of flow and rhythm --  movement, pauses, and turns, like a dance. Then together with its baselines, do texturing for the shades and shadows to create the volume.  The character of the top line and the texture strokes govern whether the rock is hard or soft, angular or rounded, flat or sheer.

The upper part of the figure shows on the lower left a pile of 5 rocks rendered as above, with the outline stroke providing a series of different shapes -- round, square , angular etc. Note also that the five are lined up in a lively manner, i.e., irregularly.  As we move to the right, we dissolves some of the top edges of each rock.  In so doing, the rocks merge into one big complex shape (the middle figure).  This shows how a series of incomplete edges and textures can form a complex shape.

A more lively rendition will be doing the shades and texture first, and then outlining the edges, as shown in the rocks on the right.   A free-style brushwork renders the shades in an irregular way, the edges are placed to include the white space into the rock.

Whether the pile of shapes are rocks or mountains will depend on the context,  i. e., the surroundings.   In the top, I added trees, a building,  and some boats.   Then the same shapes turn into a mountain overlooking a lake!